Gingerbread Christmas Teddy M & Presents UV DTF Wrap

UV DTF Libbey Cup Wrap

Sizes
16 oz: 9.5 x 4.3 in.
20 oz: 9.5 x 5.1 in.

🖤 Quality printed UV DTF wrap
🖤 Just Peel, Stick, Squeegee, and Peel!
🖤 Permanent & Waterproof

UV DTF Transfers can be applied to any flat hard surface (glass, metal, plastic, mirrors, ceramics, etc.). Once transfers are placed, they will permanently stay there unless removed with alcohol. UV DTF is not as flexible as vinyl and can crack if bent incorrectly.

All sales are final.
Please ensure to follow our application instructions; we are not responsible for any transfers damaged by incorrect application.

1. Prep Your Surface and Pre-Squeegee Your UV DTF
Prepping the Area: Clean the surface of your hard surfaced item by using soap & water. The cleaner the surface, the more the UV DTF will adhere and will help avoid easy wear and tear. Do not use Alcohol.
Pre-Squeegee: Place the design face down with the white side facing up. Using the padded end of the included squeegee or credit card, run over the UV DTF transfer with hard pressure, back and forth 3-5 times. This forces the design onto the clear carrier sheet.
2. Separating The Clear Carrier Sheet From The Backing
Separate the clear carrier sheet from the white backing by making a small tear. SLOWLY separate the clear carrier sheet from the white backing. This ensures every piece of your design is lifting onto the clear carrier sheet. If it’s not, set it back down, squeegee again, and try pulling that specific area which didn’t lift from a different side.
3. Placing your UV DTF Onto Your Item
Lay the design down starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping.
Tip: Leave an edge of the carrier sheet lifted, so you can easily grip it.
4. Completing The Transfer Process
After placing, use the padded end of the squeegee to run over the UV DTF transfer with hard pressure, back and forth 3-5 times. This forces adhesion to your item. You are now ready to SLOWLY peel the clear transfer off. If all elements do not transfer, you can lay the clear carrier sheet back down, squeegee hard again, and try pulling that specific area which didn’t lift from a different side.